Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 79)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 79

Bosch Security Systems | 8/04 | 4998153891C

RF Keyfob Options

• Address: 2939

• Default: 0

• Selections: 0, 1, 3 to 5, 7 to 9, 11 to 13, 15

Enter This Data Digit to Select Options

RF Keyfob Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No Options Selected

•

Panic Enabled

•

• • • • • • •

Alarm Output on Panic

• • • •

Assign [O] (trapezoid) key to Perimeter Only On

• • • • • •

Assign [P] key to Partial On

• • • • • •

This parameter configures all keyfobs for all areas and all PINs.

• Panic Enabled: This option configures the system’s response to the RF panic signal. Pressing the Lock and

Unlock keys on the keyfob simultaneously transmits a unique Panic signal to the RF Receiver. If the keyfob

Panic option is enabled, the system sends a Duress report. Duress reports from keyfobs follow ABC

Keys/Duress Report Routing (see ABC Keys and Duress Report Routing on page 73 and Duress Reporting Options

on page 73).

• Alarm Output on Panic: If this option is enabled, the keyfob activates the alarm output when the Lock and

Unlock keys are simultaneously pressed. The “Panic Enabled” option must enabled.

• Assign [O] (Trapezoid) Key to Perimeter Only: If this option is enabled, the keyfob arms the system

Perimeter Only when [O] is pressed. If you select this option, you cannot use [O] to activate Output Function

1|15.

• Assign [P] (Sun) Key to Partial On: If this option is enabled, the keyfob arms the system Partial On when

[P] is pressed. The [P] key on the RF keypads is also configured by this option. If you select this option, you

cannot use [P] to activate Output Function 2|0.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 79