Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 62)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 62

Bosch Security Systems | 8/04 | 4998153891C

User Tamper Options

• Address: 0380

• Default: 0

• Selections: 0 to 3

Enter This Data Digit to Select Options

User Tamper Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No User Tamper Options

•

User Tamper {156} Reports Enabled

• •

User Tamper Activates Burg Alarm Output

• •

Reserved

A user tamper event is:

− A user entering a PIN that is not in the system (the user must enter the invalid PIN the number of times

shown in User Tamper Retry Count on page 62).

− A user entering a PIN that is in the system but does not have the authority for the desired function.

• User Tamper Reports Enabled: If enabled, this option ties User Tamper {156} reports and user tamper

activated alarm outputs to the keypad’s area. If only this option is selected and there is a user tamper event,

the text keypad in the area where the event occurs shows “Keypad locked!”

• User Tamper Activates Burg Alarm Output: If the burglary alarm output (steady alarm output) is selected

and there is a user tamper event, the text keypad where the user tamper occurred shows “Keypad locked!”

Other text keypads in the area show “Usr Tamper Alarm, Enter PIN to silence.” During the time the keypad

is locked out, any key pressed produces an error tone (for text and LED keypads). Selecting this option

specifically activates output functions 1|8, 1|9, 1|10, and 8|8. Output functions 1|8 and 1|9 only activate when

the control panel is armed. See Table 25 on page 112, for descriptions of these output functions.

User Tamper Retry Count

• Address: 0381

• Default: 4 (4 attempts)

• Selections:

− 0 = User Retry Count Disabled

− 1-15 = Number of attempts allowed before a User Tamper event occurs

Enter zero (0) to disable this parameter. The control panel creates a User Tamper event when a user enters an

invalid PIN the number of times programmed in this parameter.

For example, “5” is entered in this parameter. When an invalid PIN is entered five times, a User Tamper event

occurs.

User Tamper Lockout Time

• Address: 0382

• Default: 1 (1 minute)

• Selections: 0 to 15 (min.)

This parameter determines how long a keypad is locked out when a User Tamper event occurs (selections are in

minutes).

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 155 156

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 62

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7200V2-EXP