Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 125)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 125

Bosch Security Systems | 8/04 | 4998153891C

4.8.2 RS-232 Module Configuration

The following parameters apply to the DX4010i and DX4010 RS-232 Serial Interface Modules.

Output Configuration Options

• Address: 1253

• Default: 0 (Disabled)

• Selections:

− 0 = Disabled(no RS-232 module connected)

− 1 = RS-232 Log Output using Internal Codes

− 2 = RS-232 Log Output using PC Compatible Codes

Set the RS-232 module to Data Bus Address 250. See “DX4010i/DX4010 Addressing” in the DS7200V2 Installer’s

Guide (P/N: 4998153893) for information.

This parameter only applies when the RS-232 module is used for RS-232 serial output. It does not apply if the

DX4010 is used for direct-connect remote programming.

• RS-232 Log Output using Internal Codes: If enabled, this option outputs the events using the internal

keypad character codes. Non-standard characters may not print correctly.

• RS-232 Log Output using PC Compatible Codes: If enabled, this option outputs the events using PC

compatible character codes. Non-standard characters are mapped to the closest matching character for display

or printing.

If you connect a printer to the RS-232 module and get unexpected results, check the module output

configuration (Address 1253), baud rate configuration (Address 1254) and parity/flow control/stop bit

configuration (Address 1255) for proper settings.

Baud Rate Options

• Address: 1254

• Default: 2 (2400 bps)

• Selections:

− 1 = 1200 bps

− 2 = 2400 bps

− 3 = 4800 bps

− 4 = 9600 bps

− 5 = 14400 bps

This parameter identifies which baud rate the RS-232 module should use for communication.

If you connect a printer to the RS-232 module and get unexpected results, check the module output

configuration (Address 1253), baud rate configuration (Address 1254) and parity/flow control/stop bit

configuration (Address 1255) for proper settings.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 125