Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 102)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 102

Bosch Security Systems | 8/04 | 4998153891C

Alarm Report Routing, Zone Function ##

• Address: See Table 17 on page 88

• Default: 1 (Reports to Destination 1, Events to Log/Printer)

• Selections:

− 0 = No Reports, no Events to Log/Printer

− 1 = Reports to Destination 1, Events to Log/Printer

− 2 = Reports to Destination 2, Events to Log/Printer

− 3 = Reports to Destinations 1 & 2, Events to Log/Printer

− 4 = Reports to Destination 2 only on Destination 1 Comm Fail Event, Events to Log/Printer

− 5 = No reports, Events to Log/Printer

Reports for Alarm, Cancel and Exit Error events follow Alarm report routing. See “Communication Failure

(Comm Fail)” for a description of the Comm Fail event and “Dialing Attempt Tables” for dialing sequence in the

DS7200V2 Installer’s Guide (P/N: 4998153893).

Restoral reports are routed as shown in Alarm Restoral Report Routing, Zone Function ##. Trouble reports are routed

globally. See Global Reporting Options on page 19.

Enable reporting at the Global Reporting Options parameter (see Global Reporting Options on page

19), and enter at least one phone number (or IP address) for one routing destination (see Phone

Number 1 (2) for Destination 1 (2) on page 9).

Alarm Restoral Report Routing, Zone Function ##