Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 44)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 44

Bosch Security Systems | 8/04 | 4998153891C

Tamper Reset/Arming Options

• Address: 3408

• Default: 3

• Selections: 0 to 3

Enter This Data Digit to Select Options

Tamper Reset/Arming Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No Tamper Reset/Arming Options

•

Allow User Reset of Tampers/Troubles

• •

Allow Force Arming of Tampers/Troubles

• •

Reserved

This parameter enables user reset of a tamper or trouble condition and force arming of the control panel when a

tamper or trouble condition exists.

• Allow User Reset of Tampers/Troubles: If enabled, this option allows a user with the appropriate authority

level to reset tamper and major trouble conditions. Enable Authority Level Option 9: System Functions 1 (page 57)

and Authority Level Option 10: System Functions 2 (page 58) for each user who can reset tamper and trouble

conditions.

The following conditions are treated as major trouble conditions:

− 24-hour zone missing (DX2010 Data Bus device missing)

− Controlled zone missing (DX2010 Data Bus device missing)

− Low or missing system battery

− Telephone line fail (if programmed for user reset)

− Alternate communication path fault (if programmed for user reset)

− 24-hour zone trouble (zone programmed for trouble, not alarm)

− Controlled zone trouble (zone programmed for trouble, not alarm)

• Allow Force Arming of Tampers/Troubles: If enabled, this option allows a user with the appropriate

authority level to force arm the control panel when a tamper or major trouble condition exists. Enable

Authority Level Option 7: Force Arm/Bypass (page 56) for each user who can force arm the system when a tamper

or trouble condition occurs. If the tamper or trouble is zone-related, the zone function configuration must

have the "Can Be Bypassed or Force Armed" options enabled (see Options 2, Zone Function ## on page 99).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 44