Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 28)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 28

Bosch Security Systems | 8/04 | 4998153891C

System Alarm Reports/Output Options

• Address: 3407

• Default: 7

• Selections: 0 to 7

Enter This Data Digit to Select Options

System Alarm Reports/Output Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No System Tamper Alarm Reports, No Output

•

Send System Tamper Alarm Reports

•

• • •

Send System Tamper Alarm Restoral Reports

• •

Enable System Tamper Alarm Output

• • •

Reserved

This parameter determines whether tamper alarm and alarm restoral reports are sent, and if the alarm output

operates on a tamper alarm. This parameter only applies to non-zone tampers.

• Send System Tamper Alarm Reports: If enabled, this option sends an alarm report, such as Data Bus

Device Tamper {189} alarm, to the ARC when a non-zone related tamper alarm is generated. Other non-zone

tamper alarms include Data Bus Missing Alarm {187}, Data Bus Trouble Alarm {191}, and Siren Missing

Alarm {193}.

• Send System Tamper Alarm Restoral Reports: If enabled, this option sends an alarm restoral report, such

as Data Bus Device Tamper {190} restoral, to the ARC when a non-zone related tamper condition is restored.

Other non-zone tamper alarm restorals include Data Bus Missing Alarm Restoral {188}, Data Bus Trouble

Alarm Restoral {192}, and Siren Missing Alarm Restoral {194}.

• Enable System Tamper Alarm Output: If enabled, this option activates the alarm output when a non-zone

related tamper alarm, such as Data Bus Device Tamper alarm, is generated. Other non-zone tamper alarms

include Data Bus Missing {187}, Data Bus Trouble Alarm {191}, and Siren Missing Alarm {193}.

4.2.5 Tests

System Test Configuration Options

• Address: 0244

• Default: 5

• Selections: 0 to 15

Enter This Data Digit to Select Options

System Test Configuration Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

System Test Disabled

•

Test Bell

• • • • • • • •

Test Strobe

• • • • • • • •

Test Battery

• • • • • • • •

Send Test Report

• • • • • • • •

This is a global (affects all areas) option.

When the user enters the System Test key sequence ([#][4][1]) at the keypad, the system performs a self-test that

includes the options selected at this parameter. The configuration applies to all areas.

• Test Bell: If enabled, this option makes a “bell test” part of the system test. The control panel activates the

Bell Time (1|5) and Alarm Output (1|8, 1|9, 1|10, 1|11, 1|12, and 8|8) functions for three sec. See Output

Parameters on page 107 for a complete description of output functions.

• Test Strobe: If enabled, this option makes a “strobe test” part of the system test. The control panel activates

the Strobe Output function (1|6) and waits for the user to press [*] to end the test.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 155 156

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7200V2-EXP