Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 137)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 137

Bosch Security Systems | 8/04 | 4998153891C

DACM Global Options

• Address: 3562

• Default: 0

• Selections: 0, 1, 3-5, 7

Enter This Data Digit to Select Options

DACM Global Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No DACM Global Options Selected

•

Enable Arming Confirmation

•

• • •

Any User Confirms Arming

• •

Use Tamper-Wired Processing

• • •

Reserved

This is a global parameter that affects all DACMs connected to the control panel.

• Enable Arming Confirmation: If this option is enabled, verifying a user at the DACM reader during Exit

Delay cancels the remaining Exit Delay time and arms the control panel immediately. Only the user who

started the arming process can confirm arming. If this option is disabled, verifying a user at the DACM reader

during Exit Delay cancels the arming process (the system does not arm).

• Any User Confirms Arming: If this option is enabled, any user can confirm system arming. If this option is

disabled, only the user who started the arming process can confirm arming. This option only applies when

“Enable Arming Confirmation” is selected.

• Use Tamper-Wired Processing: If this option is enabled, an open door reports as faulted (the zone assigned

to the DACM functions as a tamper-wired zone). If this option is disabled, an open door reports as shorted

(the zone assigned to the DACM functions as a single EOL zone).

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 137