Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 131)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 131

Bosch Security Systems | 8/04 | 4998153891C

Port Number for Remote Programming Callback

• Address: 3906 to 3910

• Default: 07700

• Selections: 0 to 65,535

Program the above addresses to identify the remote programming computer’s port number to the control panel.

This applies when the control panel begins an RPS session or calls the RPS computer back.

This parameter uses five addresses to enter the port number:

• First Address: Enter the 10,000’s value (this value is multiplied by 10,000)

• Second Address: Enter the 1,000’s value (this value is multiplied by 1,000)

• Third Address: Enter the 100’s value (this value is multiplied by 100)

• Fourth Address: Enter the 10’s value (this value is multiplied by 100)

• Fifth Address: Enter the 1’s value (this value is added to the other values)

The following example shows how to enter 55555 as the port number for Remote Programming Callback:

[5 x 10,000] + [5 x 1,000] + [5 x 100] + [5 x 10] + 5 = Port Number 55,555

Format for Destination 1 (2)

• Address:

Format for Destination 1: 0064

Format for Destination 2: 0130

• Default: 2 (Contact ID)

• Selections:

2 = Contact ID

3 = SIA 300

4 = Basic Pager

6 = BSIA Fast Format

7 = Personal Dialing Format

11 = SIA 300 with Text Blocks

If network communication is enabled, the control panel automatically selects Contact ID as the reporting format.

Contact ID only supports four-digit account numbers. This results in the control panel automatically truncating

account numbers for four digits.

Address 3906 Entry

Address 3907 En

Address 3908 Entry

Address 3909 Entry

Address 3910 Entry

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 131