Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 63)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 63

Bosch Security Systems | 8/04 | 4998153891C

Installer PIN

• Address: 0383 to 0389

• Default: 9876543

• Selections: 0 to 9

Do not use digits 10-15 when creating the Installer PIN or User PIN. Entering these digits makes the

PIN unusable and locks the installer out of the control panel.

The Installer PIN length is the same as all other system PINs (see PIN Length on page 61).

The default PIN length is 4 digits, which makes the Installer PIN 4 digits in length. For example, if the Installer

PIN is 7654321 and the PIN length is set to 4 digits, the Installer PIN changes to 7654.

The Installer PIN cannot disarm the system, but it can access all other functions.

The Installer PIN reports as User 0.

If the Installer PIN is left at its factory default, the control panel generates a System Trouble event if

enabled in the Date Format and Enable PIN Trouble parameter (see page 33). Make sure to change the

default value. This event is Local Only and is stored in the history buffer.

The Enable PIN Trouble option is disabled by default.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 63