Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 52)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 52

Bosch Security Systems | 8/04 | 4998153891C

4.4 User Interface

4.4.1 Authority Level Configuration

The Authority Level determines which functions are available to system users. Each user is assigned an authority

level. Use the parameters in this section to configure each of the four authority levels available in the control

panel.

Authority Level Option 1: All On Arming

• Address: 0364

• Default: 15

• Selections: 0 to 15

Enter This Data Digit to Select Options

Authority Level Option 1: All On Arming 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No PIN Required (Quick Arm)

•

Assign to Authority Level 1

• • • • • • • •

Assign to Authority Level 2

• • • • • • • •

Assign to Authority Level 3

• • • • • • • •

Assign to Authority Level 4

• • • • • • • •

This parameter enables/restricts the following functions by authority level:

• [#][1]: All On with Entry Delay

• [#][1]: All On with Entry Delay, No Exit Tone*

• [#][1]: All On with No Entry Delay

• [On] Key: All On with Entry Delay

• [On] Key: All On with Entry Delay, No Exit Tone*

• [On] Key: All On with No Entry Delay

* Exit Time is doubled (up to 254 sec) when arming the system All On with Entry Delay, Silent (no Exit Tone).

If a PIN is required and not entered, the system asks for one after the function is entered.

To enable the “Quick Arm” feature, set Authority Level Option 1 to 0. A user PIN entry is not required for All

On arming.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 52