Bosch DS7400XiV4-EXP Spécifications télécharger pdf (Page 34)

DS7400XiV4-EXP | Reference Guide | 5.0 Programming the Control Panel EN | 34

Bosch Security Systems | 1/05| 4998154963B

Step 3: Assigning a Zone Type to the Zone

5.9.3 Zone Programming: Zone Type Program Addresses

In zone type programming, each zone is assigned a zone type to define its physical location as either on-board,

single zone inputs, or multiple zone inputs.

See the DX7400XiV4 Wireless Reference Guide (P/N: 4998154790) for additional information.

The DS7465i occupies two zones. The odd-numbered zone of the zone pair is the input zone. The

even-numbered zone of the zone pair is the output relay. The output follows an output function.

See Table 24 to determine which zones apply to each program address.

• Address: 0415 to 0538

• Data Digit:

• Data Digit 1: ____ (see Table 22; default = 0)

• Data Digit 2: ____ (see Table 23; default = 0)

• Selections: 0 to 3, 5

Table 22: Address 0415 to 0538, Data Digit 1

Odd Zone Number

Select Option Value

Single Zone Input

(Zones 1 to 8 on the control panel,

multiplex contacts, sensors, or a

DS7457/DS7461i)

Multiple Zone Input

(any zone that is on a DS7432E, DS7433,

or DS7460i)

If Data Digit 1 = 1, Data Digit 2 must = 2

Multiple Zone Inputs must start on an odd

zone number

DS7465i Connections

(the input zone or the output relay on a

DS7465i)

NOTE: If Data Digit 1 = 2, then Data

Digit 2 must = 2.

Keyfob

The DX7465i occupies two zones. the odd-

numbered zone of the zone pair is the input zone.

The even-numbered zone of the zone pair is the

output relay.

Table 23: Address 0415 to 0538, Data Digit 2

Even Zone Number