Bosch DS7400XiV4-EXP Spécifications télécharger pdf (Page 22)

DS7400XiV4-EXP | Reference Guide | 4.0 Operating Guide EN | 22

Bosch Security Systems | 1/05| 4998154963B

4.5 The Master Keypad

4.5.1 General Information

Your system might include a Master keypad. A Master

keypad is a DS7447E/DS7447V2 keypad programmed

to give a user access to all the areas the user has access

to, not just the area in which the Master keypad is

located. This is different from a Standard keypad in that

Standard keypads only give access to the single area in

which they are located. Commands entered at the

Master keypad affect all the areas to which the user has

access. If this is not desired, the Master keypad can also

be used to control each area individually; this is called

Single Partition Mode. Single Partition Mode allows a

user to control any or all of the areas the user has access

to on an individual (one-by-one) basis (see Section 4.5.3

Single Partition Mode for more information).

In order to use the Master keypad, your PIN

must be assigned to the area in which the

Master keypad is located.

4.5.2 Master Keypad Displays

Master keypad displays differ slightly from Standard

keypads. The Master keypad display scrolls the Status

of each area, followed by the area number. For

example, if all areas are armed, the Master keypad

scrolls through the following displays:

Armed

area 1

Armed

area 2

Armed

area 3

Armed

area 4

Armed

area 5

Armed

area 6

Armed

area 7

Armed

area 8

If only Partitions 1, 2, 3, 4, 6, and 8 are armed, the

Master keypad scrolls through the following displays:

Armed

area 1

Armed

area 2

Armed

area 3

Armed

area 4

Ready to Arm

area 5

Armed

area 6

Ready to Arm

area 7

Armed

area 8

Displays for areas that are Not Ready display in the

same manner.

Use Table 9 to understand what each LED function of

the Master keypad represents.

4.5.3 Single Partition Mode

Single Partition Mode is used to control areas

(partitions) on a “one at a time/one by one” basis from

the Master keypad.

To enter the Single Partition Mode, enter your [PIN],

then press the [#] key twice. This accesses the first area

you have access to. Enter the command sequence you

wish for this area. You do not need to use your PIN

again. To move on to the next area you have access to,

press the [#] key twice.

To exit the Single Partition Mode, hold the [*] key

down for 2 seconds. The system also automatically

exits Single Partition Mode after 40 seconds without a

keypad entry.

Example of accessing Single Partition Mode

1. Enter your [PIN], followed by the [#] key twice:

[1][2][3][4][#][#].

The first area you have access to is displayed:

"Ready to Arm. Cafeteria."

2. Complete the command sequence (in this case

arming) you wish for this area: [On].

3. Move to the next area you have access to by

pressing the [#] key twice: [#][#].

The next area you have access to is displayed:

"Ready to Arm. Office."

4. Complete the command sequence you wish for

this area.

5. After you have completed all the command

sequences for the areas you have access to, exit

Single Partition Mode by pressing the [*] key for

two seconds.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 143 144

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7400XiV4-EXP Spécifications Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7400XiV4-EXP