Bosch B450 Guide d'installation télécharger pdf (Page 90)

Location 267 to 378

Location Default

Zone Options 2 376 14

Reserved 377 1

Report Options 378 1

The ICP-SOL2-P control panel supports up to 8 zones. The ICP-SOL3-P control panel supports

up to16 zones. Zone 9-16 can only be used in ICP-SOL3-P control panels when the EOL

Resistor Value is set as 14 or 15.

Zone Types

The zone types are listed in the table below.

Zone Type Description

0 Instant

1 Handover

2 Delay-1

3 Delay-2

4 Reserved

5 Reserved

6 24-Hour Medical

7 24-Hour Panic

8 24-Hour Holdup

9 24-Hour Tamper

10 Reserverd

11 Keyswitch

12 24-Hour Burglary

13 24-Hour Fire

14 Chime Only

15 Not Used

0 – Instant Zone

An Instant Zone (Contact ID Event Code 130) immediately sounds the sirens and operates the

communication module if it is unsealed after the Exit Timer expires.

If an Instant Zone is not restored when the time the system is disarmed, a Zone Restore

Report is automatically sent to the receiving party.

1 – Handover Zone

A Handover Zone (Contact ID Event Code 130) acts as an Instant Zone if it is activated by

itself. If a Handover Zone is activated after a Delay Zone, the remaining Delay Time is handed

over from the Delay Zone to the Handover Zone.

9.3.2

90 en | Zone Information Control Panel

2014.07 | 00n | F01U298026 Installation Guide

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 151 152

Pas de commentaire

Bosch B450 Guide d'installation Page 90