Bosch B450 Guide d'installation télécharger pdf (Page 127)

Notice!

When priority level 4, 6, 12, or 14 is assigned to any User Codes, the Standard Isolating

method no longer operates. Only User Codes with a priority level of 4, 6, 12, or 14 can isolate

zones using the Code to Isolate method.

Master Code Functions

Master Code functions allow those users that have the appropriate priority level to perform

certain supervisory level functions. You can use these functions only when the system is

disarmed.

Notice!

The default Master Code (User Code 1) is 2580. It is possible to program multiple Master

Codes

To access a Master Code function, enter the Master Code and press the corresponding

function digit and the [AWAY] button. The Master Code functions are listed in below table.

Function Description

0 Arm or disarm both areas at the same time

1 Add, change, and delete User Codes/Remote Radio User Codes

2 Change domestic phone numbers

3 Change Telco Arm/Disarm Sequence

4 Set bypass zones for STAY Mode 2

5 Turn outputs on and off

6 Set the date and time

7 Walk Test Mode

8 Event Memory Recall Mode

9 Duress Alarm (if Location 498 – bit 2 is enabled, use 3 instead of 9)

Table 14.2: Master Code Functions

Control Panel Access | en 127

Installation Guide 2014.07 | 00n | F01U298026

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 151 152

Pas de commentaire

Bosch B450 Guide d'installation Page 127