Bosch B450 Guide d'installation télécharger pdf (Page 115)

Primary Telephone Number for Receiver 1 and Receiver 2

When the control panel transmits a report, the panel dials the Primary Telephone Number to

contact the monitoring station, for example. If the call is successful, the relevant information

is transmitted and the communicator returns to Standby Mode.

If unsuccessful, the communicator attempts two more calls using the Primary Telephone

Number for Receiver 1. If these calls are unsuccessful, the communication module calls the

Secondary Telephone Number for Receiver 1 up to three times. If the dialing sequence is still

unsuccessful, the control panel repeats this sequence by dialing the Primary and Secondary

Telephone Numbers for Receiver 2 (if they are programmed).

If the first six attempts are unsuccessful and no telephone numbers for Receiver 2 are

programmed, this procedure is repeated every 10 min continuously.

Contact your monitoring station for the correct telephone numbers before you program these

locations. With a text codepad, go to menu 711 First Phone Number to program the primary

telephone numbers.

Item

Location Default

Phone Number 1 – Receiver 1 0000 – 0015 15

Phone Number 1 – Receiver 2 0040 – 0055 15

Secondary Telephone Number for Receiver 1 and Receiver 2

For programming information, refer to Primary Telephone Number for Receiver 1 and Receiver 2,

page 115. With a text codepad, you go to menu 712 Second Phone Number to program the

secondary telephone numbers.

Item Location Default

Phone Number 2 – Receiver 1 0016 – 0031 15

Phone Number 2 – Receiver 2 0056 – 0071 15

Transmission Format for Receiver 1 and Receiver 2

Select the desired transmission format here. These locations select the data format used to

transmit to the base station receiver. Location 33 selects the data format used to transmit to

the base station receiver 1. Location 73 selects the data format used to transmit to the base

station receiver for receiver 2. These locations also allow you to configure the control panel

for domestic formats.

With a text codepad, go to menu 713 Transmit Format to set the transmission for Receiver 1

and Receiver 2.

value 0 - Not used

value 1 - contact ID (default)

value 4 - Domestic

value 6 - SIA fast

value 7 - SIA Slow

value 8 - CSVIP

value 9 - Email

13.1

13.2

13.3

Control Panel Communicator Information | en 115

Installation Guide 2014.07 | 00n | F01U298026

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 151 152

Commentaires sur ces manuels

Pas de commentaire

Bosch B450 Guide d'installation Page 115

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch B450