Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 6)

Page 6

Understanding Partitioning

Your alarm system may be Partitioned.

A Partitioned system is a system that is divided into two areas which may be armed and disarmed independently.

The following applies in a Partitioned system:

• User PIN numbers are always required to perform operations in a Partitioned system.

• DS7447 LCD keypads will alternately display (about every 2 seconds) the current status of each partition.

• DS7443S and DS7445 LED keypads will alternately display (about every 2 seconds) the current status of each partition by way of the LED’s.

See “Understanding the DS7447, DS7443S and DS7445 Keypads” on pages 4 and 5 for details.

• If the User PIN has authority in only one Partition, using that PIN on any keypad will perform Arming and Disarming commands only for the

Partition in which the User has authority.

• If the User PIN has authority in both Partitions, the User may arm or disarm both Partitions by entering the commands from any keypad.

• Only Users with access to both partitions can arm common zones.

• If the User PIN has authority in both Partitions, the User may arm or disarm the first Partition only by entering the PIN number + [##] + the

arming/disarming command. To perform arming or disarming commands in the second Partition only, enter the PIN number + [####] + the

arming/disarming command.

• If Custom Arming (PIN + [#] [4]) is used in a Partitioned system, the following will apply:

- Users with access to both partitions can Custom Arm all zones.

- Users with access to both partitions cannot custom arm a single partition.

- Users with access to Partition 1 can Custom Arm any zones in Partition 1 but cannot arm common zones or zones in Partition 2.

- Users with access to Partition 2 can Custom Arm any zones in Partition 2 but cannot arm common zones or zones in Partition 1.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 6