Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 19)

Page 19

Setting Delayed Arming

This section explains how to cause the system to arm after a specified number of hours.

Delayed arming is simply causing the system to arm after a specified number of hours.

To program the system for delayed arming, perform the following steps:

NotesDelaying Arming

Enter a PIN

Enter [#] [9] [9]

to enter the Delayed Arming programming

Enter the number of hours (up to 23) from now

that you would like the system to arm. If no changes

are required, you may press [*] to exit.

For example: If if is 3:30 now, and you would like

the system to arm at 9:30, enter 06.

The keypad will display the following:

Arm in nn Hours

# to accept

Additional Notes: Delayed arming can be used even if there are no automatic arming times programmed.

Setting Delayed Arming will affect only the partitions you have access to. Users with PIN levels of 0-2 will be able to set Delayed arming.

Delayed arming will override automatic arming. Delayed arming will also provide a 15 minute pre-arm period like the

one provided with automatic arming.

You may view the time left (rounded to the nearest hour) to the arming time by entering PIN [#] [9] [9]. The display will show “Arm In __ Hours”.

Pressing the [*] key will exit the display without changing the arming time.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 19