Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 27)

Page 27

Personal Identification Numbers (continued)

PIN Authority Levels

0 = Master: Can enter all commands, add or change PINs, change

time and date, bypass, arm, set autoarm, disarm, perform system

tests, system reset, and view history. PIN 001 must be a master

code and must have authority 0. Any or all PINs may be master

codes.

1 = Unlimited: Can enter all commands, bypass, arm, disarm, system

reset, and perform system tests. Can not change PINs.

2 = General: Can bypass, arm and disarm. Can not change PINs,

system reset, or enter the [#] [7] or [#] [8] functions.

3 = Arm Only: Can arm the system with [#] [On] arming only. Can not

perform any other functions including disarming.

4 = Temporary: Valid only for a limited time. Can arm and disarm the

system, but can not perform any other functions. This code will

automatically be deleted after 15 days if you have not already done

so.

The 15 day clock is reset to 15 days each time a Temporary

PIN is assigned. All Temporary PINs expire at the same

time.

5 = Duress: When the system is disarmed using a duress code, a

silent report is sent to the central station. Duress codes are intended

to be used when the user is forced to disarm the system.

6 = Access: When a PIN with Access Code authority is entered, any

output programmed for Access Output (e.g. door strikes) will pulse

on for 10 seconds (works when the system is armed or disarmed).

continued on next page

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 27