Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 17)

Page 17

Automatic Arming

Setting the Automatic Arming Time can only be performed with a Master

PIN Code.

Notes

Each partition can be programmed to automatically arm once per day. To program the Automatic Arming time , perform the following:

Setting the Automatic Arming Time

Enter a Master PIN + [#] + [0]

Enter a [1]

to enter the Automatic Arm Setup programming

Enter the partition number.

Press [#] to exit.

Enter a time for each day.

Enter in [0] [1] [0] [0] [#] format.

The display will start with Sunday. It will read, “Sunday - nn : nn”

Enter the time in 24 hour format. You may move the cursor left or right by pressing

the "A" (Fire) or "C" (Panic) keys. When you have completed the time entry press

the [#] key. The display will then advance to the next day. You may exit the Set

Auto Arm Time Mode at any time by pressing the * key once. The system will

also exit the Auto Arm Time mode after the time is programmed for Saturday.

Samples of times:

12 noon = 1200#

12:01am = 0001#

1:00am = 0100#

Disabled = 0000#

12 midnight = 2400#

12:01pm = 1201#

1:00pm = 1300#

The program will prompt you to enter partition 1 or 2 if the system is partitioned

and if the user has access to both partitions. If the system is not partitioned or

if the user has access to only one partition, this selection will not appear.

In a non-partitioned system, the display will automatically go to Sunday.

The user will only be allowed to program the partitions to which they are

assigned.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 17