Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 15)

Page 15

This chart will guide you through the steps necessary to Change the Date displayed at the keypads.

You should write down your entries before you enter the Master Code Programming Mode

and have them with you as you begin programming. Make your entries promptly.

If a long delay occurs in your entries, the 3-beep error tone sounds and exits you from the programming mode.

Changing the Date

# 4. Enter the Day.

# 3. Enter the Month.

# 1. Enter the Master Code

Programming Mode.

"2 Change Date"

(display will scroll to this)

[Master Code] + [#] [0]

Steps to Change

the Date

Command

Sequence

If Accepted, DS7447 Display Reads

# 2. Enter a 2.

# 5. Enter the Year.

“Enter Month"

(01...12)

"Enter Day."

(01...31)

"Enter Year."

(XX) End with #

“Month, Day, Year”

A long beep signifies acceptance.

[2]

[0] [1]

through

[1] [2]

January December

[0] [1]

through

[3] [1]

The last two digits of the year,

followed by the [#] key.

NOTE:

Entering the command sequence [Master Code] [#] [0] [2] [#] will cause the DS7447 keypad to read back the date.

It is recommended that this procedure be performed at a DS7447 keypad.

No visual cues will be given from the DS7443S or DS7445 keypads.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 15