Bosch Solution 16i Spécifications télécharger pdf (Page 21)

Bosch Security Systems 09/07 BLCC500R FTR1.02

Solution 16 i

Quick Start Guide

Note

The display will ﬂash promting you to enter the

required data value.

d=01

Figure 28: List Option Programming Display

Progra mmi ng The Cl ock

Clock programming requires the following information

to be entered, dd mm yy hh mm. To accept the currently

programmed data for any ﬁeld, simply press the [

] to

move to the next field.

Enter location 7-1-0 followed by the [OK] key. The keypad

will display the currently programmed day of the month.

To change, enter the new day of the month. The system will

automatically move to the month ﬁeld.

dd=19

To change, enter the new month of the year. The system

will automatically move to the year ﬁeld.

MM=05

To change, enter the new year. The system will automatically

move to the hour ﬁeld.

yy=07

To change, enter the hour of the day in 24hr format. The

system will automatically move to the minute ﬁeld.

To change, enter the minute of the hour followed by the

[OK] key to exit.

Note

Pressing OK on any ﬁeld will accept all currently

programmed date and time values. Time is

programmed in 24 hr format.

GE T TI NG STAR TED BACK TO B ASE

The following steps are the mimimum requirements to get

the system reporting back to base. Examples assume the

panel is disarmed with no alarms and starting from factory

default settings.

1) Enter Program mode.

[1234 + MENU]

2) Set Time and Date.

[MENU 7-1-0]

3) Change Default Installer PIN.

[MENU 1-5-2]

4) Change Default Master Code PIN.

[MENU 1-1-1]

5) Enter Account (client) Number, Area 1.

[MENU 2-2-0]

6) Enter Base Primary Telephone Number.

[MENU 5-1-1]

7) Enter Base Secondary Telephone Number.

[MENU 5-1-2]

8) Hold Down MENU Key To Exit.

SERVI CE MOD E

Service mode when activated disables dialler reporting,

prevents all alarms and prevents all users from arming the

system.

To Turn Service Mode ON

1) Enter Program Mode.

[1234 + MENU]

2) Enter,

[MENU 7-0-8]

3) The display will show IS OFF if service mode is oﬀ

or IS ON if service mode is on.

4) Press the On or OFF key to change the service

mode state then press [OK] to exit.

SERViC

Note

Keypads will display SErVIC on the screen when

service mode is active.

DEFAULTING THE SYST EM

Defaulting the system will reset all programming options

back to the factory default setting. All programming

information will be erased.

To Hardware Default

1) Remove All Power To The System. AC and

Battery.

2) Press and Hold The Default Push Button

Down Then Apply Power To The System.

3) Release Button, The Panel Will Reset And

Revert To Normal Operation When Default Is

Complete.

To Software Default

1) Enter Program Mode.

[1234 +MENU]

2) Select Factory Default Option.

[MENU 7-0-4)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Bosch Solution 16i Spécifications Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch Solution 16i