Bosch PIN8 N1 Guide de dépannage télécharger pdf (Page 652)

100

101

10-70 Handling, Diagnostic and Service Functions MPH-02, MPB-02, MPD-02

DOK-INDRV*-MP*-02VRS**-FK01-EN-P

Setting the Trigger Delay

Via parameter P-0-0033, Oscilloscope: number of measured values

after trigger event it is possible to reach a trigger delay independent of

the preset trigger source (external/internal). For this purpose the number

of measured values that is to be recorded after the respective trigger

event is set in parameter P-0-0033.

Note: It is also possible to record measured values before the trigger

event occurs (trigger delay functions of an oscilloscope).

By entering "0" in P-0-0033 only data available before the

trigger event will be recorded.

If the value of parameter P-0-0032 is entered, only the

measured values that occurred after the trigger event will be

recorded.

trigger signal

trigger level

trigger status

(bit 0)

trigger delay

size of memory (P-0-0032)

no. of measured val. after

trigger event (P-0-0033)

Fig. 10-31: Trigger delay: number of measured values after trigger event

Expanded Trigger Function

Parameter P-0-0025, Oscilloscope: trigger mask provides the

possibility of triggering at certain events. For trigger signals with the

display formats "Bin" and "Hex" it is possible to mask the trigger signal

and the trigger level.

See Parameter Description "P-0-0025, Oscilloscope: trigger mask"

The trigger level can be freely set via parameter P-0-0027, Oscilloscope:

trigger level, the attribute, unit etc. being adjusted to the selected trigger

signal.

See Parameter Description "P-0-0027, Oscilloscope: trigger level"

Synchronizing the Measuring Signals of Several Axes

The parameter P-0-0035, Oscilloscope: control offset contains the

number of measured values between the occurrence of the internal

trigger event (P-0-0029; bit 2) and the external trigger event (P-0-0036;

bit 0).

Trigger Delay Function

Trigger Mask (P-0-0025)

Trigger Level (P-0-0027)

1 2 ... 647 648 649 650 651 652 653 654 655 656 657 ... 727 728

Commentaires sur ces manuels

Pas de commentaire

Bosch PIN8 N1 Guide de dépannage Page 652

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Bosch PIN8 N1