Bosch LTC 8500 Manuel d'instructions Page 44
- Page / 104
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
EN | 34 Bosch Security Systems | December 13, 2005
•Switch 5 of S1001
In the ON position, this switch is used to force the CPU into a “boot” mode so it
is ready to accept a download of an operating system program via its console
port. This setting should not be changed unless a problem has been encoun-
tered while attempting to download a new operating system program.
•Switch 6 of S1001
This switch selects the handshake setting of the console port when switch 5
(described above) is in the ON position. When ON, the handshake is enabled
(recommended position).
•Switch 7 and Switch 8 of S1001
These switches are used to set the baud rate when downloading a new operating
system program. It is recommended to use the fastest rate possible.
Lower CPU DIP Switch S1002
The lower DIP switch provides several user-selectable options. These options are as
follows:
•Switch 1 of S1002
This switch is not used in these systems and should be left OFF.
•Switch 2 of S1002
This switch allows the alarm port on the rear of the main Allegiant bay to con-
figure as an auxiliary console port when switch 2 is turned ON. This auxiliary
port allows the alarm port (in addition to the regular console port) to communi-
cate with the optional LTC 8059/00 MCS package or the optional LTC 8850/00
GUI Software package.
The port can also be used to control the Allegiant system via the Console Com-
mand Language (documented in the optional CCL manual). The normal con-
sole port and the alarm port (when switch 2 is ON) may be used to control the
Allegiant system simultaneously. Communications parameters (baud & hand-
shake) for the alarm port can be set using the keyboard (see User Function 32),
with the optional LTC 8059/00 MCS package or with the optional
LTC 8850/00 GUI Software package.
Switch Switch Baud
7 8 Rate
OFF OFF 38400
OFF OFF 19200
ON OFF 9600
ON OFF OFF 1200
DIP Switch
Number
Factory Default
Setting
“Lower”
S1002 DIP Switch Function
1OFFReserved
2OFFAlarm Port Mode
3OFFOld Keyboard Modes
4OFFPrinter Port Mode
5ON Security Feature
6OFFNot Used
7ON Keyboard Protocol Mode
8ON Communication Parameters
- LTC 8500 Series 1
- Important Safeguards 3
- Safety Precautions 4
- Sécurité 5
- Sicherheitshinweise 5
- Precauciones de Seguridad 5
- Veiligheidsmaatregelen 6
- Sicurezza 6
- Medidas de Segurança 6
- 1Unpacking 11
- 2Service 12
- 3Description 13
- 5System Components 17
- 6System Accessory Components 18
- 6.5 LTC 8555 Series Keyboards 19
- 6.9 AutoDome Series 19
- Integration Server 22
- 6.23 Logging Printer 24
- Logging Printer 25
- 7Installation Procedure 26
- 7. 3Video Output Modules 27
- 7. 4CPU Module 27
- Baud rate -- 19,200 29
- Stop bits -- 1 29
- Data bits -- 8 29
- Parity -- None 29
- Central 31
- Control 31
- Configurations 35
- 10 Feature Selection 37
- 11 Main Power Connections 38
- 12 Video Monitor Display 39
- System Status Display 40
- 13 Factory Default Settings 43
- Lower CPU DIP Switch S1002 44
- S1002 DIP Switch Function 44
- Stop Bits 1 1 1 47
- Data Bits 8 8 8 47
- Parity None None None 47
- Handshake Yes No No 47
- 14 User Information 48
- 15 Alarm Information 50
- 15.6 Sample Alarm Responses 51
- Sequence & Display Mode 52
- 15.7 Alarm Relay Response 53
- 16 Keyboard Operation 54
- 16.3 Switcher Commands 55
- 16.5 Alarm Commands 57
- 16.6 Sequence Control 58
- Run a Sequence 59
- Stop a Running Sequence 59
- 16.7 Sequence Programming 60
- Sequence Function Summary 61
- 17 Keyb oard User Functions 63
- User Function 7 - Set Time 67
- User Function 8 - Set Date 67
- 18 Maintenance Information 75
- 18.3 AC Line Fuse Replacement 76
- 20 Error Messages 80
- 21 Troubleshooting Guide 83
- 21.5 No Alarm Response 84
- 22 Glossary of Terms 86
- Appendix A Satellite Systems 88
- Monitor 92
- Output(s) 92
- Input(s) 92
- CPU Software Version Numbers 93
- C.1 Main Bay Video 96
- C.2 Keyboards 96
- C.3 Alarm Interface Unit 96
- C.4 Signal Distribution Unit 97
- C.5 Receiver/Drivers 97
- Console Port RS-232 Pin-outs 98
- Alarm Port RS-232 Pin-outs 98
- Keyboard RS-485 Ports 98
- Printer Port RS-232 Pin-outs 98
- Code Port Pin-outs 99
- COMM PORT 1 and COMM PORT 2 99
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch LTC 8500
(20 pages)
(24 pages)
(96 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.944 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels