Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 40)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 40

Bosch Security Systems | 8/04 | 4998153891C

Opening/Closing Report Routing

• Address: 0262

• Default: 1 (Reports to Destination 1, Events to Log/Printer)

• Selections:

− 0 = No Reports, no Events to Log/Printer

− 1 = Reports to Destination 1, Events to Log/Printer

− 2 = Reports to Destination 2, Events to Log/Printer

− 3 = Reports to Destinations 1 & 2, Events to Log/Printer

− 4 = Reports to Destination 2 only on Destination 1 Comm Fail Event, Events to Log/Printer

− 5 = No reports, Events to Log/Printer

This is a global parameter that affects all zones, all areas, and all PINs.

The Exit Error {18} and Recent Closing {19 to 20} reports follow alarm routing. See “Communication Failure

(Comm Fail)” for a description of a Comm Fail event and “Dialing Attempt Tables” for a description of the

dialing sequence in the DS7200V2 Installer’s Guide (P/N: 4998153893).

Enable reporting at the Global Reporting Options parameter (see Global Reporting Options on page

19), and enter at least one phone number (or IP address) for one routing destination (see Phone

Number 1 (2) for Destination 1 (2) on page 9).

Exit Time Restart

• Address: 0263

• Default: 1 (Exit Time Restart)

• Selections:

− 0 = No Exit Time Restart

− 1 = Exit Time Restart

If Exit Time Restart is set to Restart (1), a violation, restoral, and second violation of an Entry/Exit Delay zone

(before the end of Exit Delay) restarts Exit Delay. One restart is allowed per arming cycle. A violation, restoral,

and second violation must all occur at the same Entry/Exit zone.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 40