Bosch DS7200V2-EXP Guide de l'utilisateur télécharger pdf (Page 26)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 26

Bosch Security Systems | 8/04 | 4998153891C

Auto On Alert Time

• Address: 0233

• Default: 3 (15 min.)

• Selections: 0 to 15 (Time = Selection x 5 min.)

Multiply the value entered in this parameter by five (5) min. to determine the duration of the Auto On Alert. The

alert sounds before the Auto On Sked to warn users to exit or extend ([#][5][1]) the auto arming.

At the Auto On time, the control panel starts exit delay. See Sked Parameters on page 120 for a complete

description of the Auto On Skeds.

If the area is armed according to the scheduled arming state (All On or Perimeter Only) during Auto On Alert

Time and then disarmed before the scheduled arming, auto arming does not occur.

Cancel Event Enabled

• Address: 0234

• Default: 0 (No Cancel Reports)

• Selections:

− 0 = No Cancel Reports

− 1 = Cancel Reports Enabled

If the Cancel Event is enabled (enter Data Digit 1 at Address 0234), a ‘Cancel Window’ starts with the initiation of

alarm events. The Cancel Window is equal to Bell Time. If the user acknowledges the alarm inside the cancel

window, a Cancel Event is created. If reporting is enabled, a Cancel {38} or Fire Cancel {39} report is sent.

If the Abort Window is enabled, the Cancel report is not sent if the user acknowledges the alarm before the Abort

Window expires. See Alarm Event Abort Window on page 106 for more information.

Call for Service Text

• Address: 1266 to 1297

• Default: Blank

• Selections: See Table 3 on page 7

All control panel text is programmed from the text keypad in a special text-programming mode. See Text Entry

Addresses on page 7 for text programming instructions.

This parameter provides 16 characters of programmable text to be displayed in the second line of the display

whenever the first line shows “Call for Service.” It is also displayed when the keypad is extinguished and the

“Extinguish Mode Displays Date” option is enabled. See Keypad Response Options on page 70 for information on the

Extinguish Mode options.

The following are possible entries for the second line of text:

• ARC phone number.

• Preferred phone number called for service.

• “Press 0 to view.” This tells users which key to press to see system trouble details. See “Call for Service Details”

in the DS7200V2 Installer’s Guide (P/N: 4998153893).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 155 156

Pas de commentaire

Bosch DS7200V2-EXP Guide de l'utilisateur Page 26