Bosch 7000 Series Manuel Page 34

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 37
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 33
Bosch Alarm Panel Interface Manual
Revision 1.4
13 Placing Alarm Points on the Graphics screen
The System Galaxy Graphics screen is typically opened to a floor plan image and icons are dropped
onto the Graphics screen (i.e. floor plan) in the locations that represent the actual alarm points. Once
the icons are placed on the Graphic screen, the color graphic they are mapped to will be displayed when
the state/condition of the alarm point changes.
The process for setting up icons is outlined below:
1. A graphic icon is mapped to each status condition for every alarm point in the Alarm Point
Property screen - Graphics Symbols tab. See instructions for mapping icons in the Adding an
Alarm Panel Point section.
2. The graphic icons are dropped onto the floor plan in the Graphics screen. See this section on
Placing Icons in the Graphic Screen for details. The state of the graphic follows the status/condition of
the alarm point (based on mapping of symbols in the Alarm Point Property screen).
How to get the graphic icon on the Graphics screen:
Open the Graphic screen by selecting the View>Graphic option from the main SG menu; then select and
open the desired floor plan or blueprint image – the graphic will open in the Graphic screen.
Expand the Alarm Panel branch in the Hardware Tree until you can see the points
Left-click the alarm point and hold the left-mouse button down while dragging it over to the floor plan.
Release the mouse button on the desired location of the floor plan - you should see a shortcut menu with
the option ‘Drop Here’.
click the ‘Drop Here’ option to place the icon on the floor plan; the icon will display a checked border to allow
you to move and resize the icon as needed.
right-click the icon and deselect the move option once the size and location are correct. Now the icon will
display the color graphic that you assigned for the current status condition. If the icon does not show the
current status condition, refresh the graphic screen by closing and reopening it.
FIG 17: System Galaxy Graphic screen with icons
Page 34 of 37
Vue de la page 33
1 2 ... 29 30 31 32 33 34 35 36 37

Commentaires sur ces manuels

Pas de commentaire