Bosch 7000 Series Manuel télécharger pdf (Page 19)

 Bosch Alarm Panel Interface Manual

Revision 1.4

DVR Camera Settings tab

Allows operator to link status events from this alarm Point to a DVR unit and camera. When this

option is configured, the system associate a camera with the designated alarm point. When

programmed, the operator will be able to initiate DVR Viewing within system galaxy for the

alarm point.

• Video can be manually started by the operator by right-clicking the Alarm Point Icon in the

hardware tree and then picking the ‘View Live Video’ option from the shortcut command

menu. The view live video option is available from graphics screen, device status screen,

alarm panel event messages. See the GCS DVR Interface Manual for your type of DVR to

find more information on DVR Interface features.

•

The software will also automatically pop open the DVR Viewer if the point is set to require

acknowledgement of the armed-not normal/trouble. See Section 4.2; Part-3 for Alarm

Options related to popping alarms and automatically starting the Viewer.

 Select a DVR Name: the DVR must already be registered and configured – Refer to

the GCS DVR Interface Manual for your DVR for setup and operation instructions.

 Choose a Camera: the camera(s) must already be configured

 Note that changes are saved when the [Apply] button is selected

FIG 7c: DVR Settings tab (cropped)

Page 19 of 37

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 36 37

Pas de commentaire

Bosch 7000 Series Manuel Page 19