Bosch 7000 Series Manuel télécharger pdf (Page 11)

 Bosch Alarm Panel Interface Manual

Revision 1.4

4 Setting Workstation Options

This section describes setting up Workstation Options that are related to alarm features. The settings

for alarm options and the path to the alarm icons are set in the Workstation Options screen.

4.1 Setting the path to the Alarm Icons

The multi-media path to the alarm icons must be set to the correct directory for the system to find the

correct graphics used in mapping and displaying status of alarms (see section 4.1).

STEP 4: Check the Workstation Options related to Alarm Panel interface:

Part 1: Open Workstation Options screen from SG menu:

Configure>Options>Workstation Options.

Part 2: Select the Multi-Media tab and verify that the path for the graphic icons is set as needed:

 The default path is set to “C:\Program Files\System Galaxy\Icons”.

Note: If a different directory (shared directory) is used, then browse to that location. You

may need to copy the alarm panel icon-graphics to that location if they have not already been

moved. Also: if the path to the System Galaxy folder has been installed in a different location

than the default installation path, user will need to browse to that path.

 Click APPLY and OK to save changes

FIG 3: Workstation Options screen – Multi-Media tab (cropped)

Page 11 of 37

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Pas de commentaire

Bosch 7000 Series Manuel Page 11