Bosch 7000 Series Manuel télécharger pdf (Page 14)

 Bosch Alarm Panel Interface Manual

Revision 1.4

Additional Utilities explained on this page …

Also in the Alarm Panel Property screen are remote configuration options for the alarm panel.

These are utility features that allow the operator to send commands or data to the selected Alarm

Panel.

 Virtual Keypad = allows operator to mimic typing at

the Bosch keypad. Allows up to 8 keypads. Allows

operator to interface with the Bosch Alarm panel

from System Galaxy.

To use the virtual keypad, do the following:

1. set the keypad number you wish to mimic

2. type in the desired code

3. click the [#] button

4. click the [send] button to send the code to the

alarm panel

FIG 5b: Virtual Keypad dialog

 Set Poll Rate – allows operator to set the poll rate

between the alarm panel and SG (in 10

th’s

seconds)

o 0 = OFF; don’t send any status

o 5 = send status every 0.5 sec

o 10 = send status every 1.0 sec

o 15 = send status every 1.5 sec

FIG 5c: Poll Rate dialog

 Set User Code – the system allows up to 249 user

codes (per alarm panel specification). Using this

feature can overwrite an existing code at the

alarm panel if the operator chooses a number

that is already in use.

If a user code is sent from

this utility it is not stored in the SG database.

FIG 5d: User Code dialog

 Set Key Pad Text allows operator to send 16-

character text message to the Bosch keypad display.

NOTE: this message will show on all keypads

FIG 5e: Set Keypad Text dialog

Page 14 of 37

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Pas de commentaire

Bosch 7000 Series Manuel Page 14