Bosch 1710 Manuel d'utilisateur télécharger pdf (Page 47)

VideoJet XTC XF Configuration using a Web browser | en 47

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V5.60 | 2012.09

Enable DynDNS

A dynamic Domain Name Service allows you to select the transcoder via the Internet using a

host name, without having to know the current IP address of the unit. You can enable this

service here. To do this, you must have an account with one of the dynamic DNS providers

supported and you must have registered the required host name for the unit on that site.

Provider

Select your dynamic DNS provider.

Host name

Enter the host name registered for the transcoder.

User name

Enter the user name you registered.

Password

Enter the password you registered.

Force registration now

You can force the registration by transferring the IP address to the DynDNS server. Entries

that change frequently are not provided in the Domain Name System. It is a good idea to force

the registration when you are setting up the device for the first time. Only use this function

when necessary and no more than once a day, to avoid the possibility of being blocked by the

service provider. To transfer the IP address of the transcoder, click the Register button.

Status

The status of the DynDNS function is displayed here for information purposes. You cannot

change any of these settings.

NOTICE!

For information about the service, registration process and available host names please refer

to the provider.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 79 80

Pas de commentaire

Bosch 1710 Manuel d'utilisateur Page 47