Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 5)

- 5 -

Volume Control: The keypad sounder volume can be adjusted using the [1] and [4] keys along with the [*] key.

- Hold the [*] key while pressing the [1] key to increase the volume or the [4] key to decrease the volume.

Backlight Control (DS7447 Only): The display backlight intensity can be adjusted using the [3] and [6] keys along with the [*] key.

- Hold the [*] key while pressing the [3] key to increase the brightness or the [6] key to decrease the brightness.

Note: After the backlight and volume are adjusted you must arm and disarm the system once to store this information in the

control panel. If power is disconnected before the panel is armed, the backlight and volume levels will return to the

default settings.

Understanding the DS7447 and DS7445 Keypads (continued)

These Li

hts Present on the DS7445 Onl

ht Off Flashin

Perimeter

(

ellow)

Supervisor

(

ellow)

Bell

Silenced

(red)

Trouble

(

ellow)

Panel is disarmed or

is not armed Perimeter.

There are no supervisor

alarms present.

The bells do not need to be

or have not been silenced.

There are no trouble

conditions.

This Li

ht will not flash.

A supervisor

condition exists.

This Li

ht will not flash.

This Li

ht will not flash.

The perimeter is armed.

This Li

ht will not turn on stead

There has been a Fire alarm and the bells

have been silenced. To clear, enter the

Fire Reset command: [PIN] + [S

stem Reset].

A trouble condition exists.

LEDs 1-8

(red)

There are no zone alarms.

A zone (1-8) has been

alarmed.

A zone (1-8) is Not Read

to Arm, or

if a fire zone, a trouble condition exists.

1 2 3 4 5 6 7 8 9 10 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7445