Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 32)

- 32 -

This chart explains the procedure for performing a Zone Test.

It is recommended that the system be tested weekly.

The Zone Test is used to confirm that detectors will report alarms to the keypad.

A Zone Test works on all zones, except 24-hour zones and fire zones.

While the keypad is in a Zone Test, no control panel alarms will activate an alarm, except 24-hour zone alarms and fire alarms;

these will override the Zone Test function.

* = If this test is performed from a Master keypad, it must be in Single Partition Mode.

Testing your System

What will Happen

Command

Sequence

[PIN] + [#] [8] [1]

pe of

Test

“Test Zone”

will displa

on the DS7447 followed b

the zone number of an

zones that have not been

tested.

The DS7445 will flash the zone LEDs of an

untested

zones.

“Now Testin

”

will displa

on the DS7447 followed b

the zone number of the zone that is currentl

bein

violated (tested). It returns to

“Test Zone”

after the

violation.

The DS7445 will turn the zone LED on stead

for the

zone that is currentl

bein

violated (tested).

Zone Test

What to Do

Test each detector one at a

time as instructed b

the

installin

compan

To exit the Zone Test mode,

enter

our [PIN] followed b

the [#] ke

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7445