Bosch DS7445 Guide de l'utilisateur télécharger pdf (Page 30)

- 30 -

Error Displays

This chart explains the procedure for reading Error messages when the green Power Light is flashing.

Note: System faults may be read from any keypad because they are system-wide. All other Error Displays are limited to the

partition the standard keypad is in. If you are on a Master keypad, you may read Error Displays one partition at a time.

To Clear a display, enter [PIN] + [System Reset].

Clear the Error Display only on the advice of your installing company

or if you are certain the problem has been remedied.

Meanin

DS7447

DS7445

There is an Error Messa

e. To displa

the messa

e, enter [PIN] + [#][8][7].

Error Messa

Power Li

(

reen) flashin

Control Trouble

Enter #87

LED 1 on

LED 2 on

AC Power

Failure

Batter

Trouble

There is a power failure and the panel is operatin

on backup batter

If the s

stem has just been throu

h a power failure, wait at least two hours for the

batter

to rechar

e, then enter [PIN] + [S

stem Reset] to perform a batter

test.

The communicator failed to communicate with the central station.

LED 3 on

Communicator

Err

pad

Tamper

One of the ke

pads is not respondin

to the control panel.

LED 6 on

One of the ke

pad housin

s has been opened.

pad

Fault

LED 5 on

Internal error in the control circuitr

or optional circuitr

. See next pa

stem

Fault

LED 4 on

The auxilliar

power has been shorted.

Zone

Trouble

The multiplex bus is defective or has been shorted.

One of the zones is not respondin

to the control panel. This

also be displa

ed durin

power-up. (If so, i

nore it.)

Aux. Power

Fault

LED 8 on

LED 7 on

Multiplex

Bus

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7445 Guide de l'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7445