Bosch APC-AMC2-4WCF Manuel d'installation télécharger pdf (Page 45)

AMC2 4W | Installation manual Installing | en 45

Bosch Sicherheitssysteme GmbH F.01U.024.965 | V 0.1 | 2006.03

Fig. 5.20 Wet mode and dry mode of the AMC2 4W relay outputs

Maximum switching power of each relay output is 60 VA, maxi-

mum switching voltage 30 V DC and maximum switching cur-

rent 2 A.

Risk of Damage!

Do not connect externally powered devices in wet mode This

can damage the AMC2 4W

Risk of Damage!

Do not exceed switching specifications of the relay. Using

exceeding voltage or current on relay contacts in either mode

can damage the AMC-W.

NOTE!

A complete connection diagram of the relay output connectors

is shown in chapter Section 7.1 Connecting Diagrams of this

documentation.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

Pas de commentaire

Bosch APC-AMC2-4WCF Manuel d'installation Page 45