Bosch APC-AMC2-4WCF Manuel d'installation télécharger pdf (Page 31)

AMC2 4W | Installation manual Installing | en 31

Bosch Sicherheitssysteme GmbH F.01U.024.965 | V 0.1 | 2006.03

5.5 Connecting Power Supply

Connect the power supply to the 7-pin pluggable screw connec-

tor labeled with POWER on the upper case.

Fig. 5.6 Location of the power supply connector

An external power supply (10 - 30V DC) must be connected for

internal electronics at pin 1 (positive) and pin 3 (negative) of

the pluggable screw connector.

An additional power supply (12V DC) for peripheral devices (i.e.

card readers and door openers) must be connected at pin 6

(positive) and pin 7 (negative).

NOTE!

A complete connection diagram is shown in chapter

Section 7.1 Connecting Diagrams of this documentation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Pas de commentaire

Bosch APC-AMC2-4WCF Manuel d'installation Page 31