Bosch VIP X1600 Module Manuel d'utilisateur télécharger pdf (Page 70)

70 en | Configuration Using a Web Browser VIP X1600 XFM4

DOC | V4.2 | 2010.07 Installation and Operating Manual Bosch Security Systems

5.34 Advanced Mode: Alarm Inputs

You can configure the alarm inputs for the module.

Alarm input

Select N.O. if the alarm is to be triggered when the contact closes. Select N.C. if the alarm is

to be triggered when the contact opens.

Name

You can enter a name for each alarm input, which is then displayed below the icon for the

alarm input on the LIVEPAGE if configured correctly (see Section 5.14 Advanced Mode:

LIVEPAGE Functions, page 35). You can also use the name in the Forensic Search program

function as a filter option for quick search in recordings.

5.35 Advanced Mode: Relay

You can configure the switching behavior of the relay output. You can specify an open switch

relay (normally closed contact) or a closed switch relay (normally open contact).

You can also specify whether the output should operate as a bistable or monostable relay. In

bistable mode, the triggered state of the relay is maintained. In monostable mode, you can set

the time after which the relay will return to the idle state.

CAUTION!

Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may

therefore result in the Player or Archive Player programs being unable to play back the

recording.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 121 122

Pas de commentaire

Bosch VIP X1600 Module Manuel d'utilisateur Page 70