Bosch VIP X1600 Module Manuel d'utilisateur Page 31

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 122
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 30
VIP X1600 XFM4 Configuration Using a Web Browser | en 31
Bosch Security Systems Installation and Operating Manual DOC | V4.2 | 2010.07
The highest authorization level is service. After entering the correct password, this user name
allows you to use all the functions of the module and change all configuration settings.
For example, you can operate the unit and control cameras with the user authorization level,
but you cannot change the configuration.
The lowest authorization level is live. It can only be used to view the live video image and
switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as
service or if the unit is not password protected.
Enter the password for the appropriate authorization level here. The maximum password text
length is 19 characters.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
5.11 Advanced Mode: Date/Time
Date format (only for the module in Slot 1)
Select your required date format.
Device date / Device time (only for the module in Slot 1)
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time.
1. Enter the current date. Since the unit time is controlled by the internal clock, there is no
need to enter the day of the week – it is added automatically.
2. Enter the current time or click the Sync to PC button to apply the system time from your
computer to the module.
Device time zone
Select the time zone in which your system is located.
NOTICE!
The module in Slot 1 of the VIP X1600 XF is the time server for the modules in Slots 2 to 4.
Consequently, the date and time settings can only be changed for the module in Slot 1. These
parameters are deactivated for modules in Slots 2 to 4.
Vue de la page 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 121 122

Commentaires sur ces manuels

Pas de commentaire