Bosch VIP X1600 Module Manuel d'utilisateur télécharger pdf (Page 44)

44 en | Configuration Using a Web Browser VIP X1600 XFM4

DOC | V4.2 | 2010.07 Installation and Operating Manual Bosch Security Systems

5.20 Advanced Mode: Audio

You can set the gain of the audio signals to suit your specific requirements. The current video

image is shown in the small window next to the slide controls to help you check the audio

source and improve assignments. Your changes are effective immediately.

If you connect via Web browser you must activate the audio transmission on the LIVEPAGE

Functions page (see Section 5.14 Advanced Mode: LIVEPAGE Functions, page 35). For other

connections, the transmission depends on the audio settings of the respective system.

Audio

The audio signals are sent in a separate data stream parallel to the video data, and so increase

the network load. The audio data are encoded according to G.711 and require an additional

bandwidth of approx. 80 kbps per connection in each direction. If you do not want any audio

data to be transmitted, select Off.

Line In 1 / Line In 2

You can set the gain for the line inputs. Make sure that the display does not go beyond the

green zone during modulation.

Line Out

You can set the line output gain. Make sure that the display does not go beyond the green

zone during modulation.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 121 122

Pas de commentaire

Bosch VIP X1600 Module Manuel d'utilisateur Page 44