Video | LTC 8786 Series RS-232 to Biphase Converter
LTC 8786 Series RS-232 to Biphase
Converter
www.boschsecurity.com
u For use with PC or other devices running user-
supplied video controller software
u Provides up to 16 Bi-Phase control code outputs
u Each output operates up to 8 devices in a daisy
chain
u Compact design
The LTC 8786 Series of data converters are designed
to convert Bosch "Receiver/Driver and AutoDome
RS-232 Control Code Protocol" into Allegiant Bi-Phase
control code.
These units are specifically designed to transform a
single data output from a PC-based DVR (or a similar
device) into multiple control code outputs for
operating AutoDome cameras.
The Bosch "Receiver/Driver and AutoDome RS-232
Control Code Protocol" is a simplex RS-232 data
format designed to communicate with the Bosch line
of receiver/drivers, AutoDome cameras, LTC 8786
converters, and other compatible accessory devices.
Complete information on the protocol can be obtained
by downloading the manual from the AutoDome
section of www.boschsecuritysystems.com.
The input RS-232 baud rate of the LTC 8786 Series is
fixed at 9600 baud, 1 stop bit, 8 data bits, no parity,
and no handshake. The LTC 8786 Series units can be
connected directly to the RS-232 serial port of a PC
using an industry standard null modem cable. If
another connection type is required, an interface cable
can easily be constructed using the supplied 9-Pin D
connector.
Certifications and approvals
Agency Certifications
EMC Immunity EN50130-4
EMC Emission EN55022-1, FCC Part 15, Class A
Safety
Converter CE, LVD 73/23/EEC
Power Supply Adapter CE, UL, CSA, TUV
Commentaires sur ces manuels