Bosch DRC99PS25 Manuel d'installation Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
Connecting to a hob en
9
eConnecting to a hob
Connec t i ng to a hob
You can connect this appliance to a hob
(if the hob supports connection to the appliance) and
then control the functions of the hood via your hob.
Appliances can be connected to each other in different
ways:
Home Connect
Two appliances can be connected using the
Home Connect app provided that both of them are
Home Connect compatible.
Refer to the Home Connect documents supplied for
more information.
Connecting appliances directly
If the appliance is connected directly to a hob, it cannot
be connected to your home network as well. The
appliance will function as an extractor hood that is not
connected to the network and you can continue to
operate it via the control panel.
Connecting appliances via your home network
If the appliances are connected to each other via your
home network, both the hood controls on the hob and
Home Connect can be used to operate the appliance.
Notes
Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the hob.
If the extractor hood is being operated by means of
the controls on the hood itself, this mode of
operation always has priority. It is not possible to use
the hood controls on the hob during this time.
Setting up a connection
The hood must be switched off before you can connect
the hob and extractor hood.
Connecting directly
Make sure that the hob is switched on and is in search
mode.
To do this, refer to the section entitled "Connecting to
the extractor hood" in the instruction manual for your
hob.
Notes
Before connecting the appliance, reset all existing
connections to the WiFi or other appliances.
If your extractor hood is connected directly to the
hob, it cannot be connected to your WiFi as well and
you will not be able to use Home Connect.
Press and hold the D button until the Home Connect
LED starts flashing.
The extractor hood has been connected to the hob
when the Home Connect LED stops flashing and
remains continuously lit.
Connecting via your home network
Follow the instructions in the section entitled
"Automatic login to your home network" or
"Manually logging into your home network"
~ "Home Connect" on page 10
Once the extractor hood is connected to your
home network, you can connect to the hob via the
Home Connect app. To do this. follow the instructions
on your mobile device.
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Commentaires sur ces manuels

Pas de commentaire