Bosch DRC99PS25 Manuel d'installation télécharger pdf (Page 21)

Installation en

5. Carefully screw in diagonally opposite screws.

Note: Tighten the screws one at a time so that the

appliance is not wedged in the cut-out.

6. Carefully tighten screws in succession until the

appliance is flush-mounted on the ceiling.

Note: Do not overtighten the screws to ensure that

the appliance is not damaged.

Connecting the appliance

1. Press together the cable duct at the sides and

remove it.

2. Disconnect the cable at the appropriate point.

3. Undo the opposite screws to loosen the fan box.

4. Turn the fan box into the correct position according

to the installation situation.

5. Push the fan box to the side and connect the power

supply.

6. Push the fan box to the other side and connect the

ducting.

7. Position the fan box in the centre and screw it firmly

in place.

8. Connect the cable.

9. Press together the cable duct at the sides, attach

and click into place.



7

1 2 ... 16 17 18 19 20 21 22 23 24

Pas de commentaire

Bosch DRC99PS25 Manuel d'installation Page 21