Notice
When the MAP Expansion Enclosure Kit
(ICP‑MAP0120) is used in a rack, the batteries
cannot be stored in the enclosure. Place batteries
on a support shelf which is not part of the MAP
5000 portfolio, but is an optional part of the rack
itself.
Technical specifications
Electrical
AC Primary Supply Voltage: 100 VAC (-10%) to 230 VAC (+10%)
AC Line Frequency: 47 Hz to 63 Hz
Power Consumption: 150 W per power supply
(up to 32 power supplies)
Absolute Range of DC Bus: 9 VDC to 30 VDC; 28 VDC nominal
Battery Capacity: Up to 80 Ah per power supply
(up to 32 power supplies)
Battery Charge Voltage: 28 VDC
Back‑up Time: Determined by battery capacity and
system load
Mechanical
Dimensions
Panel Enclosure (HxWxD): 604 mm x 443 mm x 191 mm
(24 in. x 17 in. x 7.5 in.)
Expansion Enclosure
(HxWxD):
432 mm x 443 mm x 89 mm
(17 in. x 17.4 in. x 3.5 in.)
System Parameters
Number of Addresses
Addresses: Up to 1500
Number of Areas
Areas: Up to 500
Number of Devices
MAP LSN Gateways
(ICP‑MAP0010):
Up to 8; each with either 1 loop or 2
stubs
MAP Command Centers
(IUI‑MAP0001):
Up to 32
MAP Power Supplies 150W
(IPP‑MAP0005):
Up to 32
DR2020 Printers: 1
Number of Inputs
Inputs: Up to eight on-board inputs and one
tamper input. Expands up to 1500
addresses.
Number of Users
PINs: 1000
PINs can include up to 13 digits,
supporting a 6‑digit user ID and up to
a 7‑digit passcode.
Number of Outputs
Programmable Outputs on
LSN Bus:
Limited to maximum number of
addresses system wide
MAP Main Panel
(ICP‑MAP5000):
two power drive; two dry contact; one
auxiliary power
MAP DE Module
(ICP‑MAP0007):
five total: three supervised and two
open‑collector outputs
Environmental
Operating Temperature: -10ºC to +55ºC (+14ºF to +131ºF)
Storage Temperature: -20ºC to +60ºC (-4ºF to +140ºF)
Relative Humidity: 5% to 95% (non‑condensing) at the
operating and storage temperatures.
IP Rating: IP 30, IK04
Environmental Class II EN60950‑1; EN50130‑4;
EN50131‑1; VdS 2110
Use: Intended for indoor use.
Ordering information
MAP 5000 Main Panel
Provides wiring terminals for tamper and power supply
inputs; eight supervised inputs; Form C relay and
auxiliary power outputs; switched voltage outputs; two
Bosch Data Bus ports, and an Ethernet port.
Order number ICP-MAP5000-2
MAP Control Center
Graphical color touch screen with adjustable
backlight; built‑in speaker with adjustable volume;
user-selectable German and English languages.
Order number IUI-MAP0001-2
MAP LSN Gateway
Supports up to 127 LSN devices. Up to eight gateways
can be supported by a Modular Alarm Platform 5000
system.
Order number ICP-MAP0010
MAP DE Module
Provides two RS‑232 COM ports; three
polarity‑reversing supervised programmable outputs
for sirens, strobes, and other audiovisual devices; two
unsupervised programmable open‑collector outputs,
and seven dedicated outputs for communicator.
Order number ICP-MAP0007-2
MAP Power Supply 150W
Power supply and battery charger unit; converts up to
240 VAC input into 24 VDC and 28 VDC output.
Order number IPP-MAP0005-2
5 | Modular Alarm Platform 5000 Overview
(4 pages)
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels