Components Located in a Power Enclosure
A power enclosure kit comes with the enclosure with a
tamper switch and lockset, a MAP AC Terminal Block,
and assorted cables. It can hold a MAP Power Supply
150W and up to four batteries (12 VDC, 40 Ah each).
(+) (-)
(+) (-)
(+) (-) (+) (-)
1
2
2
2
2
3
4
5
1 MAP Power Enclosure Kit (ICP‑MAP0115)
2 Batteries (12 VDC, 40 Ah)
3 MAP Panel Enclosure Tamper Switch (ICP‑MAP0050)
4 MAP AC Terminal Block (ICP‑MAP0065)
5 MAP Power Supply 150W (ICP‑MAP0005)
Components Located in an Expansion Enclosure
The MAP Expansion Enclosure Kit (ICP‑MAP0120) can
contain a MAP Power Supply 150W (IPP‑MAP0005)
and two 18 Ah batteries. Use the expansion enclosure
for module expansion by using the MAP Hinged
Mounting Plate (ICP‑MAP0025) mounted inside the
enclosure. Fit the MAP LSN Gateways (ICP‑MAP0010)
and the MAP Accessory Mounting Plates
(ICP‑MAP0020) on the hinged mounting plate. When
the hinged mounting plate is used, the MAP Power
Supply 150W (IPP‑MAP0005) and batteries cannot fit
inside the expansion enclosure.
Power Supply Application
Power supplies can be distributed across the premises
to where the power is needed to avoid long power
cable runs. The power supply remains fully supervised
on the external BDB.
1. MAP Expansion Enclosure Kit (ICP‑MAP0120)
2. MAP AC Terminal Block (ICP‑MAP0065)
3. MAP Expansion Enclosure Tamper Switch (IPP‑MAP0050)
4. Batteries
Up to two 12 V, 18 Ah batteries connected in series.
5 MAP Power Supply 150W (IPP‑MAP0005)
LSN Gateway Application
The MAP system supports up to eight LSN gateways.
The Panel Enclosure Kit (ICP‑MAP0110) supports up to
four gateways mounted on the MAP Hinged Mounting
Plate (ICP‑MAP0025); additional gateways can be
mounted in MAP Expansion Enclosure Kits
(ICP‑MAP0120) and connected to the internal or
external BDB. Each gateway supports one loop
configuration or two stub configurations.
1. MAP Expansion Enclosure Kit (ICP‑MAP0120)
2. MAP Accessory Mounting Plate (ICP‑MAP0020)
Up to two can be placed on the upper level of the MAP Hinged
Mounting Plate
3. MAP 12V Converter (ICP‑MAP0017)
Up to two can be placed on a MAP Accessory Mounting Plate
4. SIV Fuse Plate (one on each MAP Accessory Mounting Plate
5. MAP Hinged Mounting Plate (ICP‑MAP0025)
Field wiring is accessible from the front; internal wiring is easily
accessed by swinging the panel open.
6. MAP LSN Gateway (ICP‑MAP0010)
Up to four optional MAP LSN Gateways fit on the Hinged
Mounting Plate)
7. One loop configuration
8. Two stub configurations
Rack Mount Application
For specific application requirements, the MAP
Expansion Enclosure Kit (ICP‑MAP0120) fits into a
19‑inch mounting rack. For these requirements, the
expansion enclosure contains: the MAP Hinged
Mounting Plate (ICP‑MAP0025), the MAP 5000 Main
Panel (ICP‑MAP5000), the MAP DE Module
(ICP‑MAP0007), and up to four MAP LSN Gateways
(ICP‑MAP0010). The MAP Power Supply 150W
(IPP‑MAP0005) is located in a separate enclosure.
4
| Modular Alarm Platform 5000 Overview
(4 pages)
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels