Bosch D9112B Guide de l'utilisateur télécharger pdf (Page 36)

WALK TEST ? continued

4. The burglary bell sounds for 2 seconds. When the display

panel shows ## PTS TO TEST you can begin. Test each

point by first opening and then closing the door or

window. Check the display after testing each point. For

interior points, walking past the device once is sufficient.

If any point does not test correctly, contact your security

company for service.

5. During the Walk Test you may want to see the points

that remain untested. When point text is displayed, press

ESC. The display shows ## PTS TO TEST. Press the ESC

key. VIEW UNTESTED ? is displayed. Press ENT. The

display shows ## PTS UNTESTED. Press NEXT to see a

list of the points that have not yet been tested. Move

through this list by pressing the NEXT key. To resume

the Walk Test, press ESC. # PTS UNTESTED is displayed.

Press ESC. ## PTS TO TEST is displayed. Resume testing

points. To end the Walk Test, press ESC twice.

6. When all points have been tested, 0 PTS TO TEST is

displayed. Press ESC. The display momentarily shows ALL

PTS TESTED before returning to idle text.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Pas de commentaire

Bosch D9112B Guide de l'utilisateur Page 36