Bosch D9112B Guide de l'utilisateur télécharger pdf (Page 27)

PERIMETR INST ?

Turn On the Perimeter With No Delays

Description

Use this function to turn on only the perimeter of your building,

leaving the interior of the building disarmed. This function allows

no exit or entry delay time through the perimeter, including the

designated exit delay door.

This function is useful in residential systems when everyone is

home and ready to retire for the evening. You can have the

security of an armed perimeter, yet move freely throughout the

interior of the premises.

It is also useful in commercial systems when you are working

before or after business hours and wish to have the perimeter

armed. Remember there are no entry or exit delays when you use

this function. You must disarm (turn off) the system to enter or

exit the premises.

Using Perimetr Inst:

1. Interior points are not armed with this command and

may remain faulted while arming with COMMAND 2.

2. Press the COMMAND bar. The display shows SYSTEM

COMMAND.

3. Press the 2 key.

Note: If you prefer, you may use the Command Menu in place

of steps 2 and 3 to initiate this function. Press the MENU

key to enter the Command Menu, then press NEXT

repeatedly until you reach the PERIMETR INST ?

prompt. Press ENT.

4. The display shows PERIMETR INSTANT. After arming

the perimeter without delays, you cannot enter or exit

the premises without disarming the system. Opening a

perimeter door before disarming will generate an alarm.

If this happens, silence the alarm by turning your system

off and call your security company to let them know that

it is not an emergency situation.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Pas de commentaire

Bosch D9112B Guide de l'utilisateur Page 27