Bosch D9112B Guide de l'utilisateur télécharger pdf (Page 10)

If there are bypassed points, AREA 1 ## BYPAS (## =

total number of bypassed points) is displayed, followed

by the point text descriptions of the bypassed points.

These displays scroll at the rate of 2 seconds each. If there

are no faulted or bypassed points, the displays will not

appear. Instead, the display shows NO FAULTS/BYPAS.

3. The display returns to idle text after scrolling through

the faulted and bypassed point information. You may

also press ESC to stop the display from scrolling.

To manually scroll faulted or bypassed points:

1. Ensure your command center shows idle text.

2. Press the NEXT key repeatedly to display the faulted and

bypassed point information. If there are no faulted or

bypassed points the displays will not appear. Instead, the

display shows NO FAULTS/BYPAS.

3. You can return to idle text at any time by pressing ESC.

View Faulted or Bypassed Points

To properly arm your system, all the doors and windows in the

system must be in the normal (not faulted) condition. Viewing

the faulted points helps you find faulted points and correct them

so proper arming is possible.

Your command center offers two ways of displaying faulted and

bypassed point information. The first causes the faulted or

bypassed point information to scroll automatically through the

display. The second allows you to manually scroll through each

individual point description.

To automatically scroll faulted or bypassed points:

1. Ensure your command center shows idle text.

2. Press any number key. If there are faulted points, AREA

1 ## FAULT (## = total number of faulted points) is

displayed first. This display is followed by the point text

descriptions of the faulted points.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Pas de commentaire

Bosch D9112B Guide de l'utilisateur Page 10