Bosch D1260 Series Guide de l'utilisateur télécharger pdf (Page 60)

Security System | User's Guide | Part II: System Commands - UNBYPASS A POINT? (COMMAND + 0 + 0)

Bosch Security Systems | 9/04 | 4998122475D 60

UNBYPASS A POINT? (COMMAND + 0 + 0)

Description

Unbypassing a point is a way to return a bypassed point to the

security system so that it can once again respond to trouble

and alarm conditions.

Using Unbypass a Point

1. Ensure your keypad shows idle

disarmed text.

2. Press the

COMMAND

key.

3. The display shows *System

Command*.

4. Press the

keys.

If you prefer, you may use the Command Menu in

place of steps 2 and 3 to initiate this function.

Press the Menu> key to enter the Command

Menu, then press Next> repeatedly until you

reach the UNBYPAS A POINT ?> prompt. Press

the UNBYPAS A POINT ?> soft key.

5. The display shows:

If you know the point number

you wish to unbypass, enter the

number and press the Enter>

soft key or the

ENTER

key.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 75 76

Pas de commentaire

Bosch D1260 Series Guide de l'utilisateur Page 60