Bosch D1260 Series Guide de l'utilisateur télécharger pdf (Page 49)

Security System | User's Guide | Part II: System Commands - RESET SENSORS ? (COMMAND + 4 + 7)

Bosch Security Systems | 9/04 | 4998122475D 49

RESET SENSORS ? (COMMAND + 4 + 7)

Reset Sensors

Description

Detection devices, such as smoke detectors and shock sensors,

must be reset after being activated. This function momentarily

removes power from these sensors to reset them.

COMMAND 47 also clears

point information from the

display, leaving the *Alarm

Silenced* message

in the display as a reminder that the View Memory function

can be used to view the cleared point information.

Using Reset Sensors

1. Ensure your keypad shows idle

disarmed text.

2. Press the

COMMAND

key.

3. The display shows *System

Command*.

4. Press the

key, followed by the

key.

If you prefer, you may use the Command Menu in

place of steps 2 and 3 to initiate this function.

Press the Menu> key to enter the Command

Menu, then press Next> repeatedly until you

reach the RESET SENSORS ?> prompt. Press

the RESET SENSORS ?> soft key.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Pas de commentaire

Bosch D1260 Series Guide de l'utilisateur Page 49