Bosch D1260 Series Guide de l'utilisateur télécharger pdf (Page 53)

Security System | User's Guide | Part II: System Commands - PERIMETER PARTIAL ? (COMMAND + 8)

Bosch Security Systems | 9/04 | 4998122475D 53

PERIMETER PARTIAL ? (COMMAND + 8)

Partially Turn On the Perimeter

Description

This function is used to turn on the perimeter of your building

while selected portions of the perimeter remain turned off.

Perimeter points that are not secure (faulted) when this

function is entered are automatically bypassed and are not

included in the system. This function does not turn on the

interior of your building. Entry/exit delays are provided with

this arming command.

Use this function in residential systems to turn on the front of

your house while the interior and the rear perimeter doors are

left turned off, giving you freedom of movement between the

house and patio.

In commercial systems, when you need access to the large

overhead doors to receive deliveries, using this function will

allow you to keep the rest of the building perimeter armed.

Using Perimeter Partial

1. Ensure your keypad shows idle

disarmed text.

Before using this function, decide which points are to be

left turned off. Fault the points (doors and windows) by

leaving them open. The points must remain open until

after the exit delay time expires.

2. Press the

COMMAND

key.

3. The display shows *System

Command*.

4. Press the

key.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 75 76

Pas de commentaire

Bosch D1260 Series Guide de l'utilisateur Page 53