Bosch D1260 Series Guide de l'utilisateur télécharger pdf (Page 59)

Security System | User's Guide | Part II: System Commands - BYPASS A POINT? (COMMAND + 0)

Bosch Security Systems | 9/04 | 4998122475D 59

6. One of the following messages displays (FRONT DOOR

is used here as an example):

• FRONT DOOR is not bypassed indicates the point is

not bypassed and the option is given to bypass it. If

Bypass> is pressed, FRONT DOOR is bypassed is

displayed, indicating the point was successfully

bypassed.

• FRONT DOOR is already bypassed indicates that

the point has already been bypassed.

• FRONT DOOR cannot be bypassed indicates the

system is programmed not to allow that point to be

bypassed.

• Invalid Point. Please try again indicates that the

device is not assigned to the area that you are in or an

invalid point was entered.

• No additional points indicates that there are no points

remaining to be bypassed.

7. You can return to idle text by pressing the <Exit soft key.

8. If the bypassed point is a 24 hour point, the message

24Hr Point Bypassed begins scrolling in the display. If

the bypassed point is a fire point, the message Fire Point

Bypassed scrolls in the display.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 75 76

Pas de commentaire

Bosch D1260 Series Guide de l'utilisateur Page 59